IEEE Windsor Section

IEEE

Archive for the ‘Events’ Category

Technical talk

Thursday, April 13th, 2017

IEEE Young Professionals and Women in Engineering, Windsor Section jointly presents:

Applications of Data fusion techniques in Industrial Control

About the Topic: Performance assessment and condition monitoring are important steps toward optimisation design of control loops. To provide better understanding of a given scene or process with less uncertainties could be achieved using data fusion approaches. Information/data Fusion is the merging technology which deals with the synergistic combination of data made available by various knowledge sources such as sensors. The use of sensor/data fusion concept has advantages such as “Redundancy”, “Complementary”, “Timeliness” and “Less Costly Information” which will be addressed.

Speaker: Dr. Behzad Moshiri, Adjunct Professor in Electrical Engineering at University of Waterloo

Speaker Bio: Behzad Moshiri received his B.Sc. degree in mechanical engineering from Iran University of Science and Technology (IUST) in 1984 and M.Sc. and Ph.D. degrees in control systems engineering from the University of Manchester, Institute of Science and Technology (UMIST), U.K. in 1987 and 1991 respectively. Dr. Moshiri has been as adjunct professor in department of electrical and computer engineering at university of Waterloo since 2014.

His fields of research include mechatronics, automation, advanced industrial control design, smart sensing system design, broad spread of applications of “sensor/data fusion” as well as “information fusion” concepts in mechatronics, process control, robotics, information technology, bioinformatics, biomedical engineering and intelligent transportation systems.

Date: May 5th 2017

Time: 1 PM-2.30 PM

Location: Room 3000, CEI,
University of Windsor
401 Sunset Avenue, Windsor
Ontario, Canada. N9B 3P4

For more details please contact Mojtaba Kordestani, Chair IEEE Young Professionals, Windsor Section

Please check flyer for more details

LATEX Workshop

Monday, April 3rd, 2017

IEEE University of Windsor Student Branch and Young Professionals Group presents:

A Workshop on LATEX for effective paper and thesis writing

This is a reminder for “LATEX Workshop for Thesis, a technical workshop organised by IEEE University of Windsor Student Branch, CAS/COMP chapter and IEEE Young Professionals. Dr. Luay Taha and Mr. Majid Morshedizadeh  Research assistants in University of Windsor , will be the presenters. The time and location are as follows:

Date: 06 April 2017

Time: 10:00 AM to 12:00 PM 

Location: Room 2103, CEI Building, University of Windsor

Register Here

The Entry is Totally Free.

About the Workshop: LATEX (pronounced “lay-tek” or “lah-tek”) is a free program for making scientific and technical documents, and is the standard for professionals in many STEM fields. Its purpose is to make it easy to write elegant technical documents.

The topics in the workshops will range from introductory to advanced, and the sessions will include topics such as making problem sets, lab reports, and more.

 Please follow the link to  Setup_latex in your computer.

Who Should Attend: 

Undergraduate, Graduate Students and Researchers who need to write a technical and scientific report or papers.

The workshops are engaging and interactive, and students should bring their laptops in order to follow along with the instructors. Integrating both lecture and hands-on time, students will be able to apply what they are learning and get individual help from the instructors. The instructions for installing the TEX editor is attached to this email for all interested students.

Follow flyer for more details:

 

Technical Talk

Tuesday, March 28th, 2017

IEEE Computer Society South East Michigan Chapter presents:

Automotive Functional Safety an ISO 26262 perspective

About the Topic: For road vehicles, ISO 26262 is currently the standard for functional safety in the automotive electronics domain. The standard applies to all activities during the safety life cycle of safety-related systems. At the concept phase of ISO 26262 is the risk assessment process that focuses on possible hazards caused by malfunctioning behaviour of E/E safety-related systems and mitigating them through the identification of safety goals. The design phase includes System, Hardware and Software Development; whose requirements are derived from the safety goals. ISO 26262 also prescribes the functional safety management to be followed during the safety life cycle and does support distributed development.

Speaker: Rami Debouk, Staff Researcher at General Motors Global R&D

Speaker Bio: Rami Debouk is a Staff Researcher at General Motors Global R&D Center in Warren, Michigan, USA which he joined in 2000 after receiving his Ph.D. in Electrical Engineering and Computer Science from the University of Michigan, Ann Arbor. His research interests are in system safety methods and techniques, system of systems, failure diagnosis, and fault tolerant systems.

Date: 11th April 2017

Time: 6 PM to 8 PM EST/EDT

Location: Room 201, UTLC Gallery Engineering Center, University Technology and Learning Center Building Lawrence Tech University,21000 W 10 Mile Rd, South field, MI 48075

Seats are Limited.

Click Here to Register

For more details/register please contact:

Sharan Kalwanisharan.kalwani@ieee.org

Phone: +1 (248) 980-UNIX
OR
Dr. Subra Ganesanganesan@oakland.edu

Phone: +1 (248) 635-5890

Please check South East Michigan Chapter website for more information

Technical Meeting

Saturday, March 11th, 2017

Oakland University school of Engineering and Computer Science and IEEE Computer Society South East Michigan Chapter jointly presents:

NVIDIA GPU ‘s A Transition from Gaming to Autonomous Vehicle and Cancer Research

About the Topic: In the world of big data, machine learning, artificial intelligence, vision, etc., the power of GPUs is viewed by all as being the prime driver and very central to making the GPU architecture both ubiquitous and very pervasive. The talk will trace this transition from Artificial Intelligence to Machine Learning to Deep Learning and Neural Networks. NVIDIA will introduce to us in great detail all about Deep Learning (DL) and Deep Neural Networks and all the associated fundamentals.

Speaker: Ty McKercher, Director of Architecture & Engineering  at NVIDIA

Speaker Bio: Over the last 9 Years, Ty has integrated NVIDIA technologies to help transform customer workflows. Ty enjoys solving challenging customer problems that intersect HPC, Visualization, and Virtualization. Lately, he is helping customers’ measure value from emerging technology evaluations in the field of Artificial Intelligence using Deep Neural Networks.

Date: 15th March 2017

Time: 6 PM to 7:30PM EST/EDT

Location: Room 116, Engineering Center, Oakland University, Rochester MI 48309-4479

Seats are Limited.

Click Here to Register

For more details please contact:

sharan.kalwani@ieee.org

Phone: +1 (248) 980-UNIX
OR
ganesan@oakland.edu
Phone: +1 (248) 635-5890

For more details please check flyer below:

Annual CCECE 2017

Friday, February 24th, 2017

The 30th  Annual

Call for Papers and Proposals for Canadian Conference on Electricaland Computer Engineering

April 30 to May 3, 2017, Windsor, Canada
Conference Website

The 30th annual IEEE Canadian Conference on Electrical and Computer Engineering (CCECE 2017) will be held in WindsorCanada from April 30 to May 32017CCECE 2017 provides a forum to disseminate research advancements and discoveries, network and exchange ideas, strengthen existing partnerships, and foster new collaborations. Its theme “Two Great Nations Innovate the Technology” reflects the close direct impact of ECE research on industrialization and the position of Windsor as a border city to USA. The venue is Caesars WindsorPapers are invited in the following Tracks:

1. Bioengineering
2. Devices, Circuits & Systems
3. Communications & Networks
4. Power & Energy Circuits and Systems
5. Computer & Software Techniques
6. Signal Theory & Signal Processing
7. Control & Robotics

Accepted papers will be submitted to the IEEE Xplore® Digital Library, conditional upon meeting additional requirements as detailed on the conference website. Conference content will also be submitted for inclusion into other Abstracting and Indexing (A&I) databases.
In addition, authors are invited to submit extended versions of their presented conference papers for consideration in the CCECE 2017 Special Issue of the IEEE Canadian Journal of Electrical and Computer Engineering (CJECE) within four weeks of the conference final day. CJECE is indexed on IEEE Xplore and accepts submissions via the ScholarOne Manuscript portal.

Click Here for more information.

Submitted papers must be unpublished and should not be submitted elsewhere at the same time. Accepted papers should not exceed 6 pages in two-column IEEE Transactions style. Accepted papers longer than 4 pages will be charged $100 for each extra page. Papers should be submitted as PDF files through the paper submission system . All submitted papers will be peer-reviewed by at least three independent reviewers. Please see the website for further registration details.

Full Paper submission: February 24, 2017
Acceptance Notifications: March 172017
Final version paper with registration: March 242017

Event: MATLAB Workshop

Tuesday, January 24th, 2017

The IEEE Signal Processing and Communication Chapter – Windsor Section and Graduate Student Society (GSS) are putting forth a MATLAB session for beginners and intermediate level students in coordination with MathWorks. Please Note: The seminar is divided into two sessions and you will have to register in each session as mentioned below for attending the respective session. Please register as soon as possible because we have limited spots available. Attendees will be given certificate of participation. For further queries you can contact Amin Safaei or Brinda Tank .

Date: 3rd February 2017

Place: Toldo Health Education Center, University of Windsor

Details and timings are as follows:

Session 1: Introduction to Data Analysis with MATLAB

Registration for session 1: Click Here

Time: 12:00 – 2:00 pm

Session 2: ADAS Algorithm Design and Prototyping Using MATLAB

Registration for session 2: Click Here

Time:  3:00 pm – 4:30 pm

Please check flyer for more information: Click Here

 

High Performance Computing resources

Sunday, November 6th, 2016

Are you an active researcher, a faculty member, or a student of an academic/research institute or a university in Canada,  looking for high-performance computing (HPC) resources for your research/ project?

 

SHARCNET enables Canadian researchers to access HPC resources. Here is an opportunity to find out how to access such!

To learn more about the event, please see the attached poster or follow this link.

The Poster

Technical Talk: Artificial Intelligent Imaging (AI2)

Tuesday, August 2nd, 2016

How to implement Intelligence at the System, Circuit and Device levels ?

Application: Smart CMOS Imaging

In this talk we will present the development of intelligence (vs intelligent) implementations from top-down and bottom-up approaches and from Electrical engineering design and Biological Biomimicry to Solid-state Physics prediction. Smart CMOS imaging is the application of choice where these multi-disciplinary studies interacts to suggest a novel approach for research to design intelligent devices needed in a verity of advanced technological devices and systems for a variety of applications such as biomedical and renewables systems and devices to name a few.

Represents By: Dr. Faycal Saffih 

Date: 5 August 2016

Time: 10 AM-11 AM

Location: Room 3000, CEI, University of Windsor

LATEX Workshop

Saturday, April 9th, 2016

This is a reminder for “LATEX Workshop, a technicaLATEX
l workshop organized by IEEE UWindsor Student Branch. Dr. Luay Taha and Mr. Kunwar Rehan  Research assistants in University of Windsor , will be the presenters. The  time and location are as follows:

  • Date: 12 April 2016
  • Time: 3:00 PM to 5:00 PM
  • Location: Room # 2103, CEI Building, University of Windsor

Registration Link: https://meetings.vtools.ieee.org/m/39376

The Entry is Totally Free.

(more…)

1st annual Electrical circuit design contest

Friday, April 1st, 2016

Registration for the 1st annual IEEE​​& IEEE WIE Windsor section Electrical circuit design contest is now open.

About the competition:

You can design any electrical circuit using 555 timer.
You cannot use digital components but you can create your own digital gates from transistors.

Here are some projects ideas:ieeewie

  • Motor PWM
  • Reaction Timer Game
  • 4 Way Traffic Lights
  • Driving many LEDs
  • Bike Turning Signal
  • Police Lights
  • Automatic Curtain Closer
  • Burglar Alarm 4-Zone
  • Clap on, clap off circuit

Who can register and how to register:

  • Students who have already registered for Electronics I course automatically enter the contest.
  • 1stand 2nd year Students can sign up for the competition.
  • to sign up for the competition you should register online via the following link:
  • https://meetings.vtools.ieee.org/m/38713

Time and Location:ieee_mb_blue

Thursday, April 7th, between 12:30-2:30 in CEI Buildiing, industrial courtyard